1. The printer must be powered on and the label must be loaded.
2. Press pause for 2 seconds to enter advanced mode.
3. The staus indicator will show solid yellow, indicating mode is ”manual media calibration”.
4. Press feed button twice until the data indicator is illuminated.
5. The printer is now in manual ”darkness adjustment mode”.
6. Press pause once to start the adjustment
7. The printer will print a test pattern showing the current darkness number and several barcode patterns and then pause momentarily.
8. When the printed label shows your desired darkness, press feed to set the darkness level.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article